Using method and precautions for electric power turbine
(1) the thickness of the grinding wheel should be selected according to the material and process requirements of the device to be processed. Softer metal materials, such as copper and aluminum, should be used for the more rough grinding wheel, the machining precision of the device, to use a finer grinding wheel.
(2) in accordance with the shape of the processing, the selection of the grinding wheel is selected.
(3) the wheel shall not have cracks, defects, defects or disabled, the installation must be solid. This point, in the use of the process should also pay attention to, once found that the grinding wheel has cracks, defects and other defects or disabled, immediately stop using and replace the new product; activities, should immediately stop fastening.
(4) when grinding, the operator should wear protective glasses and gloves to prevent the splashing of metal dust and sand grains on the human body.
(5) the pressure applied on the device should be appropriate, and excessive heat will cause the machining surface to be annealed, which will not be used, and the life of the grinding wheel will be reduced.
(6) the device is less than the width of grinding wheel grinding, the grinding process, not always in a position of the grinding wheel, grinding wheel in grinding surface in a certain period of about translation, aims to maintain relatively smooth grinding surface of the grinding wheel, which is convenient for processing later.
(7) in order to prevent the overheating of the machined surface of the device, the grinding part can be cooled at any time.
(8) the insulation resistance of the motor on a regular basis shall be guaranteed not less than 5M.