Safety operation specification for polishing machine
West Lake polishing machine is a kind of electric tools, polishing machine is composed of a base, 7906, polishing cloth, polishing cover and cover basic components. The motor is fixed on the base of the polishing machine, and the fixed disc is connected with the motor shaft by the screw. Polishing machine polishing fabric through the ferrule fastening on the polishing disc, the motor through the base of the switch on the power after the start, then apply pressure to the specimen by hand polishing on the rotating polishing disk.
Polishing machine safety precautions
One, found the following circumstances, not to use high-speed polishing machine
The operator has not received professional training.
The operator has not learned the "safety operation regulations".
High speed polishing machine running is not normal.
Two, the use of high-speed polishing machine before, to respond to the environment to do the following inspection
The operator's hand and foot are far away from the rotating polishing machine.
The operator may not step on the power cord or wire the power cord to the left.
The operator must be safe and secure.
Polished area shall not exceed the length of the power cord.
The operator not to sell the operating handle.
When the machine is stopped, it is necessary to completely stop the rotation of the high speed polishing machine.
Can not be used to dust, dirt, polishing pad polishing pad. The polishing pad fouling too much to clean, with timely replacement.
When changing, installing polishing pad, must cut off the power supply.
Three, high speed polishing machine for cutting off power supply.
Backward tilt, rear wheel to store.
Should not be stored in the outdoor, and should be stored in a dry place.