Polishing machine operating procedure
In the use of machinery equipment, regardless of the polishing machine, drawing machine and other equipment is a set of operating procedures, if operator skip a program, serious will cause the danger to the body, the results can be imagined; below to everybody introduced polishing machine specific details;
1, check the polishing machine polishing brush is clean, whether it needs to be replaced,
2, check the controller is in the normal speed position
3, before polishing to clear the garbage on the ground, debris and sand etc.,
4, power supply, power away from the nearest place to begin operation, boot your machine high-speed operation, stick to the ground for polishing, walking route is a straight line, behind the polishing position should be superimposed on the previously polished surface.