Current Position ：Home > Company News
What is the processing flow of the polishing machine?
West Lake polishing machine specific processing flow is how it?
1 polishing machine for the processing of the workpiece, the need to clean the polished flat, with a dip of kerosene or gasoline cloth to wipe.
2 finish the polishing machine to take off the work piece, need to grind the paste to wipe, carry on the examination to finish. The surface should be polished without fine marks and not polished to a place, and should have a certain uniformity of non glowing gray.
3 the next step is to apply the grinding paste on the grinding plate on the plate, the grinding paste must be a little thin, coated with grinding paste on the plate in the fall on the oil or not to reconcile uniform. When it is found that the surface of the workpiece has not been polished to the place, it is necessary to carry out supplementary polishing.
4 next, the workpiece is required to carry out the polishing plane, put on the polishing plate for polishing. Polishing time should be in the polished plate, with the rotating movement to carry on the processing, if in the polishing process, the emergence of the phenomenon of workpiece sliding, you need to first coated on the grinding paste clean, change a new grinding paste and then polishing. When polishing should be based on the need and to join the lubrication oil in time, because of the lack of lubricating oil and in a state of semi dry wipe, parts are very easy to produce heat. In the workpiece polishing and need to pay attention to the uniform pressure on the part, and always in the horizontal plane and in the different position up for rotating parts, otherwise it is very hard to get a correct graphic effects. If before processing, workpiece surface itself is relatively rough, in at the beginning of the need to use a relatively coarse grinding paste to close, then polishing with fine grinding paste.
5. Polishing machine polishing surface inspection, using polished rod inspection, are not allowed through the joints, using medium coloring method were used to examine the accuracy of surface fit to keep the average coated with different degree of color of choice based on the difference in accuracy.
West Lake polishing machine specific processing flow is how it?
1 polishing machine for the processing of the workpiece, the need to clean the polished flat, with a dip of kerosene or gasoline cloth to wipe.
2 finish the polishing machine to take off the work piece, need to grind the paste to wipe, carry on the examination to finish. The surface should be polished without fine marks and not polished to a place, and should have a certain uniformity of non glowing gray.
3 the next step is to apply the grinding paste on the grinding plate on the plate, the grinding paste must be a little thin, coated with grinding paste on the plate in the fall on the oil or not to reconcile uniform. When it is found that the surface of the workpiece has not been polished to the place, it is necessary to carry out supplementary polishing.
4 next, the workpiece is required to carry out the polishing plane, put on the polishing plate for polishing. Polishing time should be in the polished plate, with the rotating movement to carry on the processing, if in the polishing process, the emergence of the phenomenon of workpiece sliding, you need to first coated on the grinding paste clean, change a new grinding paste and then polishing. When polishing should be based on the need and to join the lubrication oil in time, because of the lack of lubricating oil and in a state of semi dry wipe, parts are very easy to produce heat. In the workpiece polishing and need to pay attention to the uniform pressure on the part, and always in the horizontal plane and in the different position up for rotating parts, otherwise it is very hard to get a correct graphic effects. If before processing, workpiece surface itself is relatively rough, in at the beginning of the need to use a relatively coarse grinding paste to close, then polishing with fine grinding paste.
5. Polishing machine polishing surface inspection, using polished rod inspection, are not allowed through the joints, using medium coloring method were used to examine the accuracy of surface fit to keep the average coated with different degree of color of choice based on the difference in accuracy.
Contact Supplier
