Polishing safety operation procedures is an important aspect
Safety rules for the operation of polishing has been an important aspect, we should attach importance to, so the safe handling of a polishing machine, I believe many people have had the experience, we can see, only advance notice of this aspect, we can better and safer operation of the machine.
1, view power: to maintain the integrity of the switch. Safety starting process of polishing machine: connecting the external power supply, switching power supply main switch, equipment power starting switch. Safety shutdown process: polishing machine polishing disc rotates, close the power switch off, disconnect the power supply connection.
2, prohibit arbitrary arbitrary wire, switch socket must be on the wall. Prevent water from splashing on the power supply when cleaning or cleaning equipment is carried out.
3, no unauthorized persons to enter the work area.
4, polishing machine work, such as an emergency should be immediately shut down the main power switch.
5, taking polishing mound was observed in wafers, must first stop polishing disc rotation, lift pressure control arm, until the pressure control arm fully raised to remove polishing mound, in order to avoid the accident.
6, to prohibit any parts of the body into the polishing zone in the automatic polishing machine, to avoid injuring.
7, the ground clean and tidy, not misplacing items, before the end of the day, remember to turn off the water, electricity and gas "total switch.
8, the location of the fire equipment is reasonable, the staff must master the operating methods, and regularly check whether they are intact, whether expired.