How to install the belt machine
How to install the belt machine? Today about how to install belt machine.
1, belt machine handle safety belt is pulled out, installed in the front and rear wheels, and then put the handle back to the original position.
Note: the installation of belt, should be consistent with the direction of the arrow to confirm the belt on the back of the tool and the.
2, adjust the belt track.
Open the tool seven: belt power operation, is the center of the handle to adjust with belt track. Not according to this treatment, will cause the belt edge scrape.
3, install dust bag.
The steel wire of the dust collecting bag is put on the installation position of the dust collection bag.
4, the operation of the switch.
The starting of this tool, as long as the trigger can be deducted. Once the trigger is pulled, the tool stops turning. To make continuous rotation, pull the trigger button to press the lock button. Then pull the trigger, and then relax, you can eliminate the continuous rotation.
Note: to plug before shall be the switching operation of the inspection tools whether smooth, on the trigger and then relax, abrasive belt machine trigger switch is able to bounce in situ.
Because we Hangzhou Xihu grinding wheel factory production of abrasive belt grinding machine more styles and install different ways (and some do not need to install) have any questions can inquire, we will have professional technical staff to answer for you, your satisfaction is our greatest power!