How to dust the mechanical equipment
With the more and more serious environmental pollution, the majority of users of mechanical equipment, more and more attention to the dust problem, a variety of dust methods have been released, the most commonly used are: bag filter, pulse dust filter, etc.
Most of the 1 types of bag type dust collector is in accordance with the cleaning methods of naming, mainly divided into mechanical vibration type bag type dust collector, air reverse blowing bag dust collector and pulse jet bag filter three kinds of sub micron particle size grading fine dust removal efficiency is high, the range of processing the large amount of gas.
At present, 2 common pulse dust collector, pulse dust collector is a method to get rid of the filter medium by blowing compressed air (bag or cartridge) attached to the dust; according to the size of dust collector may have several groups of pulse valve, a pulse controller or PLC control, every time a group of pulse valve to remove dust the control part of the bag or cartridge, the cartridge bag or other work, for a long time after the pulse valve under a set of open, clean up the part of the dust remover is composed of a hopper, on the box, in the box and a lower box part, and the box body is a chamber structure.