Current Position ：Home > Company News
How to choose a good belt machine
Abrasive belt machine manufacturers introduced how to choose good belt machine
How to determine the quality of belt machine? Hangzhou West Lake grinder factory technical personnel to analyze the quality problems of the belt machine, mainly has the following several points:
1, the vibration problem is: some belt machine hanging belt, start the machine, machine vibration is large, and not fixed it will run around what reason? The balance of the rotating wheel is not good! Turning wheel has a rubber wheel, a guide wheel, a motor belt wheel, and the three turning wheel has a precision, the balance is not good, the machine is not good! Another reason to support the wheel of parts with the gap is too large, resulting in relative motion between the parts, resulting in shock. And then the motor is not fixed, but also generate vibration.
2, the problem of noise: noise is the main base and the rigidity of the supporting parts shortage, with parts of the gap is too large, use low quality bearings, emery cloth belt speed too fast, for several reasons.
3, life problem: some belt machine with not how long it is broken, the reason why there are few: adjusting part adopts the grey cast iron, not the 45# carbon steel casting, or no heat treatment, bearing quality is not good, lubrication is not good, spindle without thermal modulation processing, or processing of hardness too low or too high (low and easy to wear, too high to fracture), the quality of the motor is not good.
4, the use of the problem: the size of the machine, the structure of the design is very important, better structure and the size of the science is the key to the efficiency of polishing workers.
Due to the continuous development of the technology of abrasive belt machine, abrasive belt machine polishing effect in metal processing industry has become irreplaceable. With advanced abrasive belt polishing equipment, such as surface polishing, polishing round, finishing and polishing and grinding, radius of polishing, chamfering and to burr of metal processing tasks can be achieved satisfactory. Using modular design, this can improve the flexibility of the device, reduce the cost.
How to determine the quality of belt machine? Hangzhou West Lake grinder factory technical personnel to analyze the quality problems of the belt machine, mainly has the following several points:
1, the vibration problem is: some belt machine hanging belt, start the machine, machine vibration is large, and not fixed it will run around what reason? The balance of the rotating wheel is not good! Turning wheel has a rubber wheel, a guide wheel, a motor belt wheel, and the three turning wheel has a precision, the balance is not good, the machine is not good! Another reason to support the wheel of parts with the gap is too large, resulting in relative motion between the parts, resulting in shock. And then the motor is not fixed, but also generate vibration.
2, the problem of noise: noise is the main base and the rigidity of the supporting parts shortage, with parts of the gap is too large, use low quality bearings, emery cloth belt speed too fast, for several reasons.
3, life problem: some belt machine with not how long it is broken, the reason why there are few: adjusting part adopts the grey cast iron, not the 45# carbon steel casting, or no heat treatment, bearing quality is not good, lubrication is not good, spindle without thermal modulation processing, or processing of hardness too low or too high (low and easy to wear, too high to fracture), the quality of the motor is not good.
4, the use of the problem: the size of the machine, the structure of the design is very important, better structure and the size of the science is the key to the efficiency of polishing workers.
Due to the continuous development of the technology of abrasive belt machine, abrasive belt machine polishing effect in metal processing industry has become irreplaceable. With advanced abrasive belt polishing equipment, such as surface polishing, polishing round, finishing and polishing and grinding, radius of polishing, chamfering and to burr of metal processing tasks can be achieved satisfactory. Using modular design, this can improve the flexibility of the device, reduce the cost.
Contact Supplier
